Hodgman® Aesis™ Sonic Stocking Foot
Sonic 2.0 is the next generation of sonic seam technology. Other sonically welded waders utilize a single weld but this advanced seam utilizes a double sonic weld. Each seam is constructed with a front and back folded weld eliminating the need for thousands of stitch holes in the wader. All seams are reinforced with waterproof seam tape for extra leak protection.
This wader utilizes ultra-breathable 4-Layer shell fabric on the upper. The durable puncture resistant 5-Layer shell fabric on the leg and seat ensures water stays on the outside of your wader - where it belongs. Additionally DWR (Durable Water Repellant) external coating provides long lasting performance.
Anatomic left and right custom fit stocking foot booties are sculpted for comfort and long lasting peformance while wading.
The removable Core INS™ system creates the first all season wader for cool or warm weather wading. The multi-zone insulation system features a Thinsulate® insulation between icy water and the lowest parts of your body that are submerged most often. If you work up a sweat the specialized insulation keeps you warm even in moist conditions. A fleece upper ensures comfort and where you need less insulation above the water. Simply unzip the liner and detach the leg snaps to remove the liner for comfort while warm weather wading.
- Durable puncture resistant 5-Layer seat and legs with no inside leg seam eliminating leak points from abrasion points
- Breathable 4-Layer upper for moisture vapor transfer
- Sonic 2.0 seams
- Top loading external pocket with water resistant zipper
- Suspender system converts waders from chest to waist high without removing suspenders
- Anatomically correct left and right neoprene booties
- Flip out internal zippered storage pocket
- Stretch wade belt with low profile DuraFlex® buckle and belt loops
- D-Ring on back for net
- Core INS removable insulation system compatible
We know you’ll be in and out of drift boats or climbing river edges on your mission to catch fish, so we utilize 5-layer construction on the leg and seat for exceptional puncture resistance. Additionally, we eliminated inside leg seams in high abrasion areas while still allowing articulation in the knees for stellar range of motion and mobility.
The upper wader incorporates 4-layer shell fabric for added breathability where you need it most and features with a Durable Water Repellant (DWR) coating to shed water from your wader.
Convert your wader to waist high without removing your suspenders via the drop down system for hot days. A large capacity YKK® zip chest pocket is perfect for storage, plus an outer mesh tippet pocket and internal flip out storage pocket are included.
Comfort is key for long days wade fishing, so we use anatomically correct left and right booties with the Hodgman print design for a custom fit. Each stocking foot bootie utilizes 5mm thick neoprene to keep your feet warmer in cold water.
This wader also accepts the Core INS removable zoned insulation system so you can transform your wader for cold or warm weather wading (sold separately). The liner zips in to create the one and only all-season wader available today.
Convert your Hodgman® wader using the one and only all-season wader insulating system. The removable Core INS system utilizes zoned insulation in your lower body where you need it most. We utilize Thinsulate® insulation in the leg and hip which are submerged most often so the frigid bite from cold water doesn’t reach your legs. Additionally, if you work up a sweat getting to your fishing spot the moisture resistant breathable insulation keeps you warm even when moist. A fleece upper ensures comfort where you need less insulation above the water.
To install the Core INS system in a few minutes follow these easy steps. You can also watch the instructional video at www.hodgman.com
- Lay the wader and the liner face up next to each other on the ground.
- Unbuckle the shoulder straps to allow access to the inside of the wader. (On the drop top designs included on the Aesis Sonic waders remove the Velcro attachment point located on the rear buckle instead of unbuckling the front of the wader).
- Reach inside the wader and pull the right leg of the wader inside out to expose the connection snap points located at the inside top of the stocking foot bootie.
- Connect the liner to the wader by snapping the corresponding green snaps to green connection points on the wader and the red to red connection points. Then snap the front and back connection points in place. (Be sure the leg on the Core INS liner is not twisted.)
- Reach inside the wader and pull the left leg inside out and connect the corresponding red, green and black connection points as you did in step 3.
- Grab the stocking foot of each wader leg and pull to turn the wader right side out. The liner will be pulled inside your wader as the wader is turned right side out.
- Secure the upper portion of the removable liner to the wader using the two zippers located on the upper inside of the wader. The zippers are under the flap of fabric just inside the top of the wader.
When the liner is installed in your wader it is recommended you point your toe when putting on the wader. This will prevent your toe from pushing fabric over the entrance hole into the stocking foot bootie.